Precautions for steel mill slag pots during tipping

26 Mar,2019 UTC+8 Views:


The steel plant should be self-locking in the operation of the slag pot tipping device, and the tilting angle of the tilting casted steel slag pot needs to be less than 116 degrees. When pouring the slag, it is necessary to select the topography to prevent accidental injury to the slag shell when the slag is poured.

slag pot steel casting

1. The slag poter needs to take a good stop wheel operation before it can turn over the slag pot at a long distance. When turning the slag pot, everyone must stay away from the poter.

2. When the slag pot is turned over, it is also necessary to supply power. This requires the use of some concealed plugs to take the flexible cable, which needs to be operated at a distance of 30 meters from the slag pot.

3. The crust of the can or the crust inside the slag pot after the slag is slag can be treated by a slag smashing machine or a smashing machine.

4. When there is more iron in the slag, it should not be dumped.

5. When the heavy slag pot cannot turn over the slag, it needs to wait for it to completely solidify before processing.

Slag pots are often used in steel mills, so customers will choose some of the more reliable large-scale casting foundries when they choose. They must have professional casting equipment, so that the quality of steel castings can be assured and the service life is guaranteed.